FAQ’S:

1.  If your tire comes off the bead, you can put a rachet strap around the center of the tread and compress to seat the bead and air it up.

2.  You can remove tire shrader valve and add liquid soap and window washer fluid rated for winter temps to aid in filling sticker air leaks in tire. If you are looking for balast you could use antifreeze and water 50/50. (@Lower speeds only, higher speeds will unbalance your tire.)

3.  If stickers are a bigger issue add rubber glue and a strip of an old innertube to the inside of the tires tread area. In addition  you could add an innertube.

4.  At higher speeds remove grease from transaxle (not hydrostatic) and add 90wt. oil, while case is apart you could add a filler/oil check hole and bolt.

5.  Tighten steering or replace with rack and pinion.

6.  At higher speeds you may need to lower your tractor for better cornering.

7.  Belt sizes are in inches and millimeters, Also thickness is measured in letters A-D typically but there are larger sizes. A/B sizes can be in 1 inch increments.

8.  In general the more the horsepower the greater the RPM. 1800-3600.

 

This website is still under construction.

Michael Dudley

702 301 1820         E:bearlyracing@yahoo.com

On facebook at:

SW IDAHO MODIFIED MOWERS

UPDATED 2.27.24

 SW IDAHO MODIFIED MOWERS